OZONE TEST CHAMBER (UET-301)

 It is used to study the ozone proof functions of rubber and rubber products, as ozone is the main reason for cracks in rubber.

Density control analyzer for 50-1000pphm.

Standard temperature: 400 to 700 C / 10 to 700 C

Humidity Range: less than 65% RH.

( Optional) HMI+PLC based controller.

THERMAL SHOCK CHAMBER (UET-302)

 It provides cycled temperature conditions from cold to hot or hot to cold in thermal shock, with the switching time not more than 10 seconds.

Sizes: (WxHxD)

 Internal size: 80L : W500*400*400mm (can be customized)

External size: 80L: 1400*1850*1500mm (can be customized)

Temperature shock range: High temperature +60?~ +200? Low temperature -40?~ -10?

Preheating temperature range: 60?--200?

High temperature Chamber heating time: RT to +200? ≤30min

Pre cooling temperature range: (-10)?~ (-70)? ?Temperature fluctuation: ±1.0?

Temperature uniformity: ±2.0? 

( Optional) HMI+PLC based controller.

THERMAL CYCLIC CHAMBER (UET-303)

 Internal Dimension WxHxD (mm) 500x400x400

External Dimension WxHxD (mm) 1550x1950x1550

Temperature Range of Testing zone

Type A: -40 ?~+150? ( 200? is Optional)

Type B: -55? ~+150? ( 200? is Optional )

Type C: -65? ~+150? ( 200? is Optional)

Exposure Time of High/Low Temperature

Exposure Time of High Temperature: +60? ~ +150? (200? is Optional) 30Mins

Exposure Time of Low Temperature : -10?~Type A:-40? / Type B -55? / Type C -65? 30Mins

Temperature of Heat-Storing Slot / Heating Time: RT to 200? about 45mins

Internal and External Material: Material of the inner box is SS 304#,of the outer box is stainless steel

or see cold-rolled steel with paint coated

( Optional) HMI+PLC based controller.

SALT SPRAY CHAMBER (304)

 Internal Dimension WxHxD (cm) 60×45×40 90×60×50 120×80×50 200×800×50 200×100×60

External Dimension WxHxD (cm) 107×58×103 138×80×115 170×95×121 170×95×121 265×100×135

Temperature Range: Box temperature-RT~50?,±0.5?

             Air saturation barrel temperature-Brine tank temperature~50?,±50?

Brine tank temperature-Brine tank temperature~50?,±0.5?

Saturated air pressure(kg/m²): 0.8~0.2

Mist volume(ml/80cm²/h): 0.5~3.0

Humidity: More than 90% (Through fog)

( Optional) HMI+PLC based controller. 

SEED GERMINATION CHAMBER (UET-305)

 Designed for germination and development of seeds under different crucial environmental parameters

like humidity, temperature and illumination with greater accuracy to provide more uniform and stronger

seedlings

Construction: External- Epoxy powder coated MS sheets

                        Internal- High grade SS 304 stainless steel

Temperature Range: Single Chamber- 5 oC to 60oC

                                    Dual Chamber- Chamber 1: 5 oC to 60oC Chamber 2: Ambient+5 oC to 60oC

Temperature Sensitivity: +1°C

Humidity Range: 20-85% RH (as per graph)

Humidity Sensitivity: ±1%RH ?Temperature Sensor: PT-100

Inner Dimensions / Capacity (Each Chamber): 518 W x 910 H x 548 D mm / 265 Liters

( Optional) HMI+PLC based controller.