OZONE TEST CHAMBER (UET-301

It is used to study the ozone proof functions of rubber and rubber products, as ozone is the main reason for cracks in rubber.

Density control analyzer for 50-1000pphm.

Standard temperature: 40 to 70℃~ / 10 to 70℃~

Humidity Range: less than 65% RH.

( Optional) HMI+PLC based controller.

THERMAL SHOCK CHAMBER (UET-302)

t provides cycled temperature conditions from cold to hot or hot to cold in thermal shock, with the switching time not more than 10 seconds. Sizes: (WxHxD)

Internal size: 80L : W500*400*400mm (can be customized)

External size: 80L: 1400*1850*1500mm (can be customized)

Temperature shock range: High temperature +60℃~ +200℃ Low temperature -40℃~ -10℃

Preheating temperature range: 60℃--200℃

High temperature Chamber heating time: RT to +200℃ ≤30min

Pre cooling temperature range: (-10)℃~ (-70)℃

Temperature fluctuation: ±1.0℃

Temperature uniformity: ±2.0℃

( Optional) HMI+PLC based controller.

THERMAL CYCLIC CHAMBER (UET-303)

Internal Dimension WxHxD (mm) 500x400x400 External Dimension WxHxD (mm) 1550x1950x1550 Temperature Range of Testing zone

Type A: -40 ℃~+150℃ ( 200℃ is Optional)

Type B: -55℃ ~+150℃ ( 200℃ is Optional )

Type C: -65℃ ~+150℃ ( 200℃ is Optional)

Exposure Time of High/Low Temperature

Exposure Time of High Temperature: +60℃ ~ +150℃ (200℃ is Optional) 30Mins Exposure Time of Low Temperature : -10℃~Type A:-40℃ / Type B -55℃ / Type C -65℃ 30Mins Temperature of Heat-Storing Slot / Heating Time: RT to 200℃ about 45mins Internal and External Material: Material of the inner box is SS 304#,of the outer box is stainless steel or see cold-rolled steel with paint coated.

( Optional) HMI+PLC based controller.

SALT SPRAY CHAMBER (UET-304

Internal Dimension WxHxD (cm) 60×45×40 90×60×50 120×80×50 200×800×50 200×100×60 External Dimension WxHxD (cm) 107×58×103 138×80×115 170×95×121 170×95×121 265×100×135 Temperature Range: Box temperature-RT~50℃,±0.5℃

Air saturation barrel temperature-Brine tank temperature~50℃,±50℃

Brine tank temperature-Brine tank temperature~50℃,±0.5℃

Saturated air pressure(kg/m²): 0.8~0.2

Mist volume(ml/80cm²/h): 0.5~3.0

Humidity: More than 90% (Through fog)

( Optional) HMI+PLC based controller.

SEED GERMINATION CHAMBER (UET-305)

Designed for germination and development of seeds under different crucial environmental parameters like humidity, temperature and illumination with greater accuracy to provide more uniform and stronger seedlings

Construction: External- Epoxy powder coated MS sheets
Internal- High grade SS 304 stainless steel

Temperature Range: Single Chamber- 5oC to 60oC
Dual Chamber- Chamber 1: 5 oC to 60oC Chamber 2: Ambient+5oC to 60oC

Temperature Sensitivity: +1°C

Humidity Range: 20-85% RH (as per graph)

Humidity Sensitivity: ±1%RH

Temperature Sensor: PT-100 Inner Dimensions / Capacity
(Each Chamber): 518 W x 910 H x 548 D mm / 265 Liters

( Optional) HMI+PLC based controller.