upkaran Technologies
Test Chamber Manufacturers India Test Chamber Suppliers Quality Control & Laboratory Test Chambers
Upkaran Technologies
FUME HOOD
As a global leader in sterilization and infection control, Tuttnauer provides autoclaves that satisfy the needs of any operating room, central sterile services department.
Contact us
FUME HOOD (UET-501)
Fume hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection to user. It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour from the hood working area. MOC: GI Powder Coated / Stainless Steel / Polypropylene Type: Floor Standing Model / Table Top Model
| MOC: | GI Powder Coated / Stainless Steel / Polypropylene |
|---|---|
| Type: | Floor Standing Model / Table Top Model |
| Working Area WxDxH : | 600x600x900mm, 600x600x1200mm, 600x600x1800mm |
| Bottom Arrangements: | Cabinets, With Cupboard With One Horizontal Partition and Shutters, Locking Arrangements. |
| Baffles: | Aerodynamic Shape Fully Made Of 3mm FRP. |
| Work Top: | Black Granite 18mm |
| Sash Shutter: | Single, Vertical Sliding, Balanced With Counter Weight. |
| Blower Type: | Centrifugal Blower |
| Powered By: | 1 HP 1440 RPM Single Phase. |
| Exhaust Duct: | PVC/FRP Duct Pipe |
| Electrical Arrangements : | 2 Nos. 15/5 Amps 3 Pin Socke |
| Illumination: | By 4 Feet Tube Light. |
| Sink & Tap: | Sink With Outlet Nipple Single Way / Three Way Swan Neck Tap |
DUCTLESS FUME HOOD(UET-502
Constructions: Mild Steel / Stainless Steel-304
| Table: | Stainless steel sheet of 304 grade/ fortified acid proof glazed tiles |
|---|---|
| Sink: | Stainless steel sink with tap |
| Coating: | Epoxy Coating |
| Air Flow: | Unidirectional |
| Air Flow Velocity: | 0.4m/sec |
| Air Flow Control: | Three step air flow speed controller |
| Blower Assembly: | Centrifugal lubricated bearing type ISI marked assembly |
| Illumination: | Fluorescent light illumination greater than 800 lux on work table |
| Noise Level: | Noise level less than 60 dB |
| Nominal Voltage: | : 220- 230 Volts Single Phase |
| Working Size: | 4’ x 2’ x 2’ / 4’ x 2.5’ x 2.5’ / 5’ x 2.5’ x 2.5 |
WET BENCH FUME HOOD(UET-503)
Construction: All stress-relieved white polypropylene, 0.5" (13 mm) thick or all 304 stainless steel. Standard plumbing is PVC (specify 304 stainless steel or other desired material). Exhaust: Ducted through a standard 10" (254 mm)-diameter flange positioned at the top rear of the cabinet (see airflow illustration). Specify other desired flange diameter or location.
| Drain: | 2" NPT female, located at bottom of sub-deck plenum. |
|---|---|
| Power: | 120VAC, 60Hz or 220VAC, 50Hz, depending on component selection. Power outlets available for process equipment. |
| Illuminator: | 800 lux |
| Controls: | : Instrument panel provides power switch, power indicating light, light switch, static pressure exhaust meter, and power fuse. Provisions are made for audible and visible pressure alarm, visible alarm silence, and for control of optional processing baths |
| Noise Factor | 50 dBA |
| Filter Type: | 99.99% efficient HEPA |
| Air Flow: | Unidirectional |
| Air Flow Control: | Three Step Air Flow Speed Controller |
| Blower Assembly: | Centrifugal lubricated bearing type ISI marked assembly |
| Nominal Voltage: | 220- 230 volts, 50Hz single phase |
TABLE TOP FUME HOOD(UET-504
Construction: All stress-relieved white polypropylene, 0.5" (13 mm) thick or all 304 stainless steel. Standard plumbing is PVC (specify 304 stainless steel or other desired material). Exhaust: Ducted through a standard 10" (254 mm)-diameter flange positioned at the top rear of the cabinet (see airflow illustration). Specify other desired flange diameter or location.
| Constructions: | Mild Steel / Stainless Steel-304 |
|---|---|
| Table: | Stainless steel sheet table of ss-304 grade/ fortified acid proof glazed tiles |
| Coating: | Epoxy coating/ FRP lined |
| Air flow: | Unidirectional |
| Blower assembly: | Centrifugal lubricated bearing type ISI marked assembly |
| Illumination: | Fluorescent light illumination greater than 800 lux on work table. |
| Noise level: | less than 60 db |
| Power requirements: | 500 watts -750 watts( model specific) |
| Nominal voltage: | : 220- 230 volts, 50Hz single phase |
| Frequency: | 50 |
| Working Size: | 4’ x 2’ x 2’ / 5’ x 2’ x 2’ / 6’ x 2’ x 2’ / 7’ x 3’ x 3’ / 8’ x 3’ x 3’ |
POLYPROPYLENE FUME HOOD(UET-505)
| Exterior and interior construction: | Structural polypropylene |
|---|---|
| Exhaust: | 500 cFM-1250cFM |
| Static Exhaust: | 20mm-38mm |
| Exhaust Duct: | 102*610 mm |
| Down Flow Velocity 105 LFPM: | 60 LFPM (0.30 m/s) |
| Inflow Velocity: | 105 LFPM (0.53 m/s). |
| Power Requirements: | 230V, 50 Hz |
| Working Size: | 4’ x 2’ x 2’ / 5’ x 2’ x 2’ / 6’ x 2’ x 2’ / 7’ x 3’ x 3’ / 8’ x 3’ x 3’ |
FUME HOOD SCRUBBER(UET-506)
| Constructions: | Thick PCRC, pre coated corrosion resistant GI sheet |
|---|---|
| Table: | : Stainless steel sheet table of 304 grade/ fortified acid proof glazed tiles |
| Static Exhaust: | 20mm-38mm |
| Sink: | Stainless steel sink with tap |
| Coating: | Epoxy coating/ FRP lined |
| Inflow Velocity: | 105 LFPM (0.53 m/s). |
| Air flow: | Unidirectional |
| Air flow: | Unidirectional |
| Noise level: | Noise level less than 60 db |
| Air flow control: | Three step air flow speed controlle |
| Blower assembly: | Centrifugal lubricated bearing type ISI marked assembly |
| Illumination: | Fluorescent light illumination greater than 800 lux on work table |
| Nominal voltage: | 220- 230 volts, 50Hz single phase |
| Working Size: | 4’ x 2’ x 2’ / 5’ x 2’ x 2’ / 6’ x 2’ x 2’ / 7’ x 3’ x 3’ / 8’ x 3’ x 3’ |