BIOLOGICAL SAFETY CABINET (CLASS-1) (UET-601)

Constructions:	Stainless-Steel / PCRC Powder Coated Sheet, table of SS-304 grade
Cleanliness (Class):	ISO class 3
Face velocity:	90±20 ft/min
Pre Filter:	Washable pre-filter unit
HEPA Filters:	Glass pleated non-woven fabric filter having 99.99% efficiency 0.3 micron particle size
Work Top:	Black Granite 18mm
Air Flow:	Unidirectional.
Air Flow Control:	Three Step air flow speed controller
Blower Assembly:	Centrifugal lubricated bearing type ISI marked assembly
Illumination:	800 lux
Noise level:	: 54 db
Differential pressure indicating precision:	1%
Add on features:	Gas/air/vacuum line cock
Power Requirements:	500 watts – 750 watts (Model specific
Nominal voltage:	220-230 Volts
Working Size:	2’x2’x2’ / 3’x2’x2’ / 4’x2’x2’ / 6’x2’x2’

BIO SAFETY CABINET (CLASS-2) (UET-602)

Cabinet Construction:	PCRC / Stainless Steel-304
Cleanliness Class:	ISO class 3
Illumination Level:	>800 Lux
Noise Pressure (dB) (A):	65 db
Filter:	HEPA
Airflow Velocity (inflow):	75 fpm
Air Supply Filter:	Washable
Differential Pressure Indicating Range:	15-30 mmWg
Differential Pressure Indicating Precision:	+ 1%
Working Size:	2’x2’x2’ / 3’x2’x2’ / 4’x2’x2’ / 6’x2’x2’
Size of HEPA Filter:	2’x2’x6” / 3’x2’x6” / 2’x1.5’x3” / 1.5’x2’x6

BIOLOGICAL SAFETY CABINET (CLASS-3) (UET-603)

Made of stainless steel, no circulation takes places inside workspace and the blower will exhaust all the 100% of the filtered air, surrounds the work zone having negative pressure while a microprocessor controls cabinet functions. A lcd panel to display the monitoring of the cabinet air flow and a blower run meter is there to track operating life. Pre filter washable and HEPA filters made of mini pleated non-woven fabric. The filters deliver an efficiency rating which is better than 99.99% at DOP (cold) and 99.97% at DOP (hot), can hold particles of greater than 0.3 micron, fitted balanced motor and blower, work on 220-230v ac, 50 Hz

Internal Size (WxHxD):	600x600x600mm, 900x600x600mm, 1200x600x600mm, 1800x600x600mm.
Outer Wall, Inner Wall:	Stainless Steel
Side Walls:	Acrylic Sheets
Exhaust:	100%
Exhaust Filter & Down Flow Filter:	Filter With Efficiency 99.99% at 0.3 Micron
Ultra Violet Tube Light:	Germicidal
Static Pressure Measurement:	Magnetic Gauge

AIR SHOWER (UET-604)

Construction: All stress-relieved white polypropylene, 0.5" (13 mm) thick or all 304 stainless steel. Standard plumbing is PVC (specify 304 stainless steel or other desired material). Exhaust: Ducted through a standard 10" (254 mm)-diameter flange positioned at the top rear of the cabinet (see airflow illustration). Specify other desired flange diameter or location.

Constructions:	MS Sheet / Stainless Steel (SS 304), anodized aluminum doors with clear acrylic windows
Operation Time (Adjustable):	0-9,990 seconds
Pre Filter:	Washable pre-filter unit (Non-Woven Synthetic Polyester)
HEPA Filters:	Glass pleated non-woven fabric filter having 99.99% efficiency 0.3 micron particle size.
Air Flow:	Multi Directional
Face Velocity:	18-20 m/sec + 2
Air Flow Control:	Solid State Control Unit
Illumination:	Fluorescent light illumination greater than 800 lux on work table
Blower Assembly:	Centrifugal lubricated bearing type
Noise Level:	Noise level less than 60 db
Add On Features:	Sequential feature operation by door mat magnetic switch
Nominal Voltage:	415 Volts, 50 Hz Three Phase

LAMINAR AIR FLOW (UET-605)

Cabinet construction:	SS-304 / PCRC Sheet
Frequency:	50Hz
Nominal voltage:	220-230 volt
Air flow:	Unidirectional
Air flow velocity:	90±20 fpm
Noise pressure(dB) (A):	54dB.
Pre filter unit:	Washable pre filter unit
Illumination:	Fluorescent light illumination greater than 800 lux
Power Requirements:	500-750 watts
Internal work space (mm):	2’x2’x2’ / 3’x2’x2’/ 4’x2’x2’ / 6’x2’x2’ / 8’x2’x2’
Working Size:	: 2’x2’x2’ / 3’x2’x2’ / 4’x2’x2’ / 6’x2’x2’ / 8’x2’x2’

FUME HOOD SCRUBBER(UET-506)

Constructions:	Thick PCRC, pre coated corrosion resistant GI sheet
Table:	: Stainless steel sheet table of 304 grade/ fortified acid proof glazed tiles
Static Exhaust:	20mm-38mm
Sink:	Stainless steel sink with tap
Coating:	Epoxy coating/ FRP lined
Inflow Velocity:	105 LFPM (0.53 m/s).
Air flow:	Unidirectional
Air flow:	Unidirectional
Noise level:	Noise level less than 60 db
Air flow control:	Three step air flow speed controlle
Blower assembly:	Centrifugal lubricated bearing type ISI marked assembly
Illumination:	Fluorescent light illumination greater than 800 lux on work table
Nominal voltage:	220- 230 volts, 50Hz single phase
Working Size:	4’ x 2’ x 2’ / 5’ x 2’ x 2’ / 6’ x 2’ x 2’ / 7’ x 3’ x 3’ / 8’ x 3’ x 3’